How to read this
Tide pins show the highest projected high tide in the next 7 days at each NOAA gauge, in feet above normal high tide, and the day it hits. The projection is NOAA’s tide prediction plus how far the water is running above it now. Pin color compares that peak with the gauge’s flood threshold: below within 0.5 ft minor flooding moderate major.
Tide projection. NOAA publishes the astronomical tide; it doesn’t publish a public surge forecast for these gauges through this API. The page adds two anomalies to the tide prediction: the one measured over the last two hours (“if today’s anomaly holds”) and the 30-day average (“background anomaly”, which captures the El Niño warm-water lift). Storm surge usually fades within a day or two, so treat the first as the stormier case. NWS’s own numbers appear in the Coastal Flood alerts on the Now tab, and those come first.
Flood thresholds come from NOAA CO-OPS for each gauge, converted to feet above MLLW: the NWS minor-flood threshold where one exists, otherwise NOAA’s high-tide-flooding thresholds or the gauge’s action level.
Tidal flood extent uses NOAA Office for Coastal Management inundation maps (the Sea Level Rise Viewer data), built from lidar elevation in half-foot steps above normal high tide. Pale to light blue is land that water would cover from the Bay at that level (paler is shallower). The Bay, the ocean and NOAA’s deepest flooding class all share the same water blue. Green areas sit below that level but aren’t directly connected, so water usually reaches them only through storm drains, culverts or a breached levee. The timeline under the map steps through the next 7 days in 12-minute steps: NOAA’s tide prediction at the chosen gauge plus how far the water is running above it now. At each step the map shows the NOAA flood level closest to that water height. Press ▶ to play it, drag across the curve to scrub, or use the arrow keys. “7-day forecast peak” holds the map on the week’s highest projected tide instead. It’s a screening map: it leaves out waves, wind, rain runoff and small barriers the lidar misses.
Flood check looks up ground elevation at your spot from the USGS 3D Elevation Program (lidar, NAVD88). It converts that to the nearest tide gauge’s datum and compares it with the projected peak water level. A spot below the water level floods only if water can reach it, so check the map layer for connectivity.
FEMA flood zones are the regulatory 1% (“100-year”) and 0.2% (“500-year”) annual-chance flood zones from FEMA’s National Flood Hazard Layer. FEMA only draws them at street-level zoom.
Rain gauges are ASOS airport stations plus about 290 county ALERT/HADS gauges via Iowa Environmental Mesonet. Totals are since local midnight. Two checks hide likely sensor problems: readings over 8 inches in a day, and gauges near zero while the gauges within 8 miles have a median of ¾ inch or more.
Radar is the NEXRAD composite (last 50 minutes, 5-minute steps).
Map layers. Tides are on by default. Radar, rain gauges and river gauges are off but one click away in Layers, or from the Rain and Rivers tabs. NWS alerts appear as text only: coastal ones on the Tides tab, rain and river ones on the Rain tab.
Everything loads straight from public government APIs in your browser and refreshes on its own: alerts, gauges and radar every 5 minutes, tides every 10, forecasts every 30. This is a monitoring aid, not an official warning source. For decisions, follow NWS and local emergency officials.